Introduction For MR110

Thank you for purchasing Dynatron’s Miracle Remote. This remote will actually allow you to operate most if not all of the features found on your TV, just like your original remote! It is amazingly simple to use. Remember our slogan: No Programming, No Codes, It Just Works! Just remember to put in batteries! The operating instructions are listed below. You should consult your TV owner’s manual for additional information on operating specific functions. Also remember this is a TV only remote: it will not operate other devices such as a DVD or VCR, nor will it operate features not found on your original remote control.

This remote is designed to operate most Sony® televisions. For the common features, please see the back of the package. Only the more complicated features and features with alternate names will be discussed below.

The TV/VIDEO* key allows you to access DVD, VCR or games.
The ANT* key allows you to change the VHF/UHF input to Aux inputs.
The PICTURE IMAGE* key also known as PICTURE MODE allows you to alternate through the varying video modes.
PICTURE SIZE* also known as WIDE MODE changes picture format, ratio and size.
PREVIOUS CHANNEL also known as JUMP allows you to view the last channel.
SPLIT SCREEN* also known as TWIN VIEW ™ allows you to watch two pictures side by side. Refer to your TV owner’s manual for more instructions.
Pressing the MENU key once brings up the on screen menu and pressing MENU again exits the menu. The four-arrow keys allow you to move through the menu. Press the SELECT key to choose the menu option. Most TV adjustments for audio, video and channel auto programming are done through the menu.
(Note that on certain TV’s made prior to 1990 you will not be able to adjust the color. In addition, some functions on older TV’s were done by pressing individual function buttons on the remote control as opposed to using the menu.)
Pressing the RESET while in the menu will return the TV to its original factory settings.
Pressing the GUIDE* will bring up the specialized guide for some cable and satellite receiver.
SLEEP* turns the TV off in 15,30,45,60,90, or 120 minutes. Keep pressing the SLEEP button to cancel. This feature maybe accessed through the menu.
AUTO PGM automatically programs all your channels, on newer TV’s this feature is found in the set- up menu.
CBL allows you to switch from air to cable, and to go past channel 13 when auto programming on older TV’s.
MTS* changes audio setting including stereo, mono & 2nd language. On newer Sony TV’s this feature is found in the MENU.

PIP WINDOW * The following controls are located in the PIP box at the bottom of the remote.
SOURCE is also known as the 2nd TV/VIDEO button and allows you to choose alternate inputs.
The CH+/CH- keys are utilized to change the channel in the PIP window. Note: On TV’s with single tuners you must use your VCR as the 2nd tuner: please reference your owner’s manual for complete hookup instructions. Just a reminder that certain PIP functions or any function not found on your original TV remote will not work.

For more detailed information on specialized PIP features and all other features please refer to owner’s manual. NOTE: Not every button will work on every TV. For additional information visit us online at www.miracleremote.com

* Any function not found on your original TV remote will not work.

Sony® is a registered trademark of the Sony® Corporation. This is not an original Sony® product.
Twin View™ is a registered trademark of the Sony® Corporation